Will this grille fit my Jeep, and can you assemble it for me?

This grille fits all Wrangler JL models and the Gladiator JT. It’s a direct swap-and-play installation—no drilling, cutting, or extra modifications required.In most cases, your grille will arrive 80% assembled if a trim slots customization was ordered. You’ll simply snap in the left and right surrounds, push in the clips, and you’re set. For certain single stage finishes, we may leave those pieces unassembled to prevent scratching during transit.Assembly and installation are straightforward. A manual is included, and we also provide step-by-step installation videos.

What are my options to customize this grille?

The beauuuty of this grille is that every part can be refinished and assembled for a completely personal, unique look.We’ve divided our customization options into two categories—Color-Matched and Raptorized. They're Interchangeable, and please allow us to walk you through how they can be mixed and matched.Color Matched 2024 Grille: This listing alone gives your front end a refreshed OEM look with a clean paint match to your factory color. The seven slots and two rings included in this offer come pre-painted in Rubicon Grey.see photo ↓To give the iconic seven slots and headlight rings a more aggressive, off-road-ready, or an elegant look, pair this grille with our Trim & Slots Customization, where we offer several blackout finishes for the trim pieces, including Raptorized texture, Satin Performance Black, and Gloss Black. Also, this is the place for that trendy single slot color pop up!💡See photo below for a Smooth Raptorized Trim. The entire mesh, trim, and chin are raptorized together for a fully uniform finish with no pieces left untreated.💡See photo below for a Satin Performance Black Trim - It’s low-key and good looking—appearing dark grey under direct light and a muted black in the shade. We finish it with a single-stage satin clear. The 7 slots are removed from the main grille for proper refinishing, and if you’d like the mesh painted as well, we can do that at no extra cost—just leave a note at checkout.

What is a Two-Tone Willys style or 392 grille?

The iconic Willys style and some 392 grilles only get the surround pieces color-matched.The 7-slot trim and the main center panel (usually colored) stay in matte black, just like the photo below.We offer the same look in two options here, the only difference is the panel.1- Two-Tone Raptorized Grille - A Raptorized Panel2- Two-Tone Matt Black Grille - A Matt Black Panel

What does “Raptorzied” mean?

Truck Bed Liners!Originally engineered to take the abuse of daily use in truck beds, they’ve built a cult following as rugged armor for off-road builds. We first fell in love with their bold look and proven toughness after seeing Raptorized Jeeps at SEMA.For Jeeps, though, we wanted a finish that looked tougher yet more OEM(less clumpy). So we adjusted the formula—smoothing out the heavy “popcorn” texture into a subtle, powder-coat-like finish while keeping the same hardcore protection against UV, weather, and trail damage. The result is smooth coating that shrugs off the elements and requires almost no upkeep.

What should I know about the build quality of your 2024 grille?

Our plain 2024 grille is built to OEM fitment, specifications, and structure, and finished with a satin performance black coating on the panel. The standard Rubicon Grey trim on our grille features a solid, durable coating designed to withstand harsh chemicals such as strip wash and alcohol. While many aftermarket grilles on the market rely on lower-grade materials and less precise molding—often resulting in inconsistent fitment and incorrect dimensions—these differences are usually only noticeable when compared side by side.Photo by @Mexican_Overlander

I can’t seem to find the COLOR I’m looking for!

Every color shown in our listing means we either have it in stock or already have the paint mixed and ready to spray. These are factory-code–matched colors that we purchase by the gallon.If your color isn’t listed, no worries — we can mix it through our local supplier.Just leave a note at checkout or reach out to us. We can do any color with a valid paint code, but we cannot match colors based on photos or HEX codes. Sorry!

Do your tape-on parts hold well?

They fly off the minute you start driving — just kidding.Our tape-on parts hold extremely well. We use 3M VHB tape, and we’ve run these parts through drive-through car washes on our own Jeep and Bronco to test durability. When the surface is properly cleaned, the bond is incredibly strong.When you’re ready to remove it, the tape comes off in one clean piece — unlike cheap foam tapes that crumble and make a mess.

Do you offer any warranty on your paint work?

This might sound crazy, we do offer a decent "Lifetime Warranty" on our paint work.We’ve always taken care of our customers, and that won’t change. If something goes wrong — whether it’s our fault or just “God’s plan” — we’re not going to leave you stuck with a scarface. Here’s how it works:We Cover any paint-failure issues. We’ll replace the part with some questions asked.• 1-year warranty on all painted parts• Lifetime warranty on all Raptorized partsAfter the warranty ends, we offer replacement parts at a discount.No Repair — we ship you a freshly refinished replacement.However, paint failures caused by external factors aren’t covered. In those cases, we can still offer a discounted replacement for the original purchaser, but they aren’t considered product defects to be fair.Examples include:Damage from improper care (pressure washer too close, harsh chemicals, etc.)Angry Birds, Rock chips or road debrisAccidents, impacts, or any “acts of God”

Willys-Style Two Tone Grille Color-Matched for 2024 Jeep JL/JT

Refresh your rig with the iconic, OG look of the Willys 24 style grille. This custom-built package is designed for the ultimate contrasty front-end transformation, featuring a color-matched 3-piece outer surround that blends seamlessly with your factory paint.

We’ve taken the classic design and added a bold, high-contrast twist with multiple ways to customize your finish.

Step 1: Choose Your Main Panel Finish

The center main panel provides the "heart" of your grille's look. Select the texture that fits your build:

Satin Matte Black: A smooth, premium, and sophisticated finish for a clean, "stealth" aesthetic.
Raptorized Black: Our ultra-tough, textured coating. It’s engineered to resist trail debris, stone chips, and harsh weather while adding a rugged, off-road grit.

Step 2: Select Your 7-Slot Blackout Style

Complete the look by choosing from three signature black-out options for your 7-slot inserts. Whether you want a deep gloss, a subtle matte, or a textured finish, these inserts provide the depth and dimension that set your build apart from the stock crowd.

For a Single Slot Accent- Add option from Step 2

Keep all other options set to ‘NO,’ since those are included for this customization.

Gloss Black

Crystal Black sealed under ultra-gloss 2K Euro clear delivers a refined, elegant finish. *Product shown features a two-tone Raptorized grille with gloss black trim.

Learn More